An injector control valve comprises a key component of the fuel system in a diesel engine. The Derun Mechanical control valve injector contributes to how the fuel is delivered to the engine. It regulates the quantity of fuel that enters the engine’s cylinders at the appropriate moment. The injector control valve opens and allows high-pressure fuel to flow into the cylinder. This fuel is combined with air inside the cylinder. It is then ignited, creating a mini-explosion which provides propulsion to the engine. The combustion process is necessary to make engine go.
As with all mechanical parts, injector control valves require care and maintenance throughout their lifecycle to function properly. So, to maintain, it means cleaning, removing its adjustment to ensure it is still functional, and replacing any components that may have become worn or defective. When we will not treat these values then they will not work correctly and this will cause the issue. For instance, if the valve is not working correctly, this would result in low engine performance or impact the functioning of the engine. It can also lead to excessive fuel consumption, which is wasteful and could increase costs. Pollution generated which is also bad for the environment. That is why maintenance is vital to keep things up and running.
Clogging is a commonly occurrence in case of injector control valves. Clogging seems to take place, when the dust, dirt, or any dirt, get stuck in the valves. When this happens it can be prevented from flow of fuel coming into the cylinder as it should. This can really affect engine performance and make it less efficient in running. A second problem may arise from the valve becoming worn. As time goes by, the different parts of the valve can wear out, which can cause it to leak fuel or fail to open and close correctly. Should you observe any of these issues, including abnormal noises produced by the engine or a substantial loss in power, then your vehicle needs to be assessed by a qualified mechanic. A good mechanic can find the problem and fix it, but the nice running of your car will not be too cheap.
One of the essential factors in realizing how good a diesel engine runs is the control of the Derun Mechanical Injector Control Valve opening time over how long the diesel is injected into the diesel engine. The engine can then control the amount of fuel more evenly when the valve is functioning correctly. Such precise control results in improved power delivery, fuel economy, and emissions. Fuel economy: when the same work requires less fuel because of economy, costs less. This is significant because lower emissions means that lower toxic gas goes into air which is good for our environment. But when the valve fails or when it does not operate properly, engine performance can suffer. This results in more fuel consumption due to engine using more fuel than needed, and high emissions which is not good for the environment. For this reason, it is important to regularly maintain the injector control valve. Being mindful of it keeping its performance on point for the engine means a smooth, efficient workhorse.
There has been significant development in injector control valves since the past few decades. Thanks to these new technologies, these valves have become much more efficient and reliable. The most recent developments include electronic control technologies. Such systems enable a highly precise control of fuel flow redistribution and the engine injection timing. Such precision allows the engine to be at its best. Materials and new coatings have also been created that can make the injector control valves more robust. These enhancements are aimed at providing the Derun Mechanical 625C control valve with a level of protection against wear and corrosion both of which can easily develop over a period of time. Using these technologies, they can make engine cleaner and more fuel efficient.
Derun has set the development of Injector control valve as the goal, always puts green environmental protection at the top of its list in both research and development. The company is dedicated to the diesel engine power industry with low emissions, low noise, high performance and low polluting.
Injector control valve owns more than 300 sets of the latest processing equipment. It has developed high-end production techniques, the most advanced testing and manufacturing equipment, as well as industrial introduction of research and manufacturing technology. It owns more than360 employees comprising 10 senior engineers, and 20 quality-control executives. They have developed and tested various models of fuel injectors. inlet valve assembly, fuel pumps, nozzles etc.
Derun is one of the Injector control valve for automotive components manufacturers in China that has more than more than 38 years of production and more than 1,000 components. The products we sell are sold all over the world, through 300+ dealers. It has currently set up 3 subsidiaries in China and has established strong cooperating relationships with more than 30 countries around the globe.
Derun is an organization certified by ISO9001 and ISO/TS16949 quality system. Derun employs a Injector control valve of quality testing equipment and examines every component before it leaves the manufacturing facility.
Copyright © Guangzhou Derun Mechanical & Electrical Fittings Co., Ltd All Rights Reserved - Privacy Policy